Pair Process

You can only pair your modules with one phone or tablet.

To be able to control your modules with the application, the first thing to do is to pair your modules with the application.

First of all, it is necessary that:

  • Whether your phone / tablet is compatible (Bluetooth®, GPS).
  • That the module is sufficiently charged (at least 1 charging LED on).
  • That the module has not been paired.

If the module has already been paired, or if the module does not want to pair, follow the Reset module procedure.

Pairing

Preparation

Bring your phone / tablet near the module (30 cm max).
Open the app.

Start

From the application:

  • Touch the Devices tab at the bottom of the screen.
  • Touch the
  • Touch the icon

Paring

The module flashes briefly. The procedure begins.

Wait for it to finish.

If that doesn't work make sure you have at least 1 charging LED on. Otherwise, follow the Reset module procedure.

Done

The module now appears in the devices list. It is ready to be controlled.

Module’s control

By clicking on the module icon you access its control, thus adjusting the brightness, switching off and on the module remotely.

Notes: You can control a module up to 20 meters in an open environment.

Reset module procedure

If you have pairing issues or anything else, you can reset your module.
That is to say that all previous pairing will be lost, Choice of brightness reset to 100%.

Make sure 1 charging LED is on.

  • Press the right button, and hold it for at least 12 seconds.
  • At the end of this time, the module flashes, it is now reset.
    You can release the button.